Added --no-reasons flag

README.md

@@ -14,6 +14,8 @@ A supported EVGA 30-series card with iCX3.  This includes:
 
 The number of fans supported depends, of course, on your particular model.
 
+You must have the `i2c-dev` kernel module loaded with `modprobe i2c-dev`
+
 Access to the `/dev/i2c` device files, which means either:
 * Run as root, or
 * Install udev rules to allow user access. If you have the OpenRGB udev rules installed to control the LEDs you already have this set up.
@@ -39,7 +41,7 @@ Note that when controlling fans directly through iCX3 they will fall offline fro
 
 ```text
 Available options:
---i2c N      : Only probe I2C bus N instead of all (may help with stuttering with --watch)
+--i2c N      : Only probe I2C bus N instead of all (may help with stuttering or freezing when probing I2C devices)
 --gpu N      : Control only GPU N instead of all supported cards
 --fan SPEED  : Set all fans at once to SPEED (see below)
 --fanN SPEED : Set fan N (0-3) to SPEED
@@ -53,6 +55,7 @@ Available options:
 --watch N    : Keep printing output every N seconds
 --overwrite  : Overwrite previously displayed info with --watch and --compact instead of continuously logging new lines
 --color      : Print headers in color in --compact mode for better readability
+--no-reasons : Do not query NVML for clocks reasons (can cause stuttering)
 ```
 
 ### Examples:

evga-card.h

@@ -91,6 +91,9 @@ struct card_info {
 	int i2c_fd;							/* File descriptor for the i2c device file, for re-use */
 	int product_id;						/* EVGA internal product ID, as reported by the iCX3 controller */
 	unsigned int bar0;					/* Address of the card's PCI base address register */
+	void *nvml_device;					/* Pointer to nvmlDevice_t for use in NVML calls */
+	void *vram_addr;					/* Memory mapping for GDDR6 temps */
+	void *hotspot_addr;					/* Memory mapping for hotspot temperature */
 };
 
 struct gpu_pci_info {

evga-icx.c

@@ -24,7 +24,7 @@ char *header_start = "";
 char *header_end = "";
 
 static const char helpstring[] = "Available options:\n"
-								 "--i2c N      : Only probe I2C bus N instead of all (may help with stuttering with --watch)\n"
+								 "--i2c N      : Only probe I2C bus N instead of all (may help with stuttering or freezing when probing I2C devices)\n"
 								 "--gpu N      : Control only GPU N instead of all supported cards\n"
 								 "--fan SPEED  : Set all fans at once to SPEED (see below)\n"
 								 "--fanN SPEED : Set fan N (0-3) to SPEED\n"
@@ -37,9 +37,10 @@ static const char helpstring[] = "Available options:\n"
 								 "--compact    : Print sensor reading in a compact one-line per card format\n"
 								 "--watch N    : Keep printing output every N seconds\n"
 								 "--overwrite  : Overwrite previously displayed info with --watch and --compact instead of continuously logging\n"
-								 "--color      : Print headers in color in --compact mode for better readability\n";
+								 "--color      : Print headers in color in --compact mode for better readability\n"
+								 "--no-reasons : Do not query NVML for clocks reasons (can cause stuttering)\n";
 								 
-void print_gpu_info(int gpu_num, struct card_info gpus[], int compact);
+void print_gpu_info(int gpu_num, struct card_info gpus[], int compact, int no_reasons);
 
 int main (int argc, char **argv)
 {
@@ -50,6 +51,7 @@ int main (int argc, char **argv)
 	int gpu_num = -1;    /* Card to control */
 	int i2c_bus = -1;
 	int overwrite = 0;
+	int no_reasons = 0;
 	unsigned int watch = 0;
 	char *fan_speed[ICX3_MAX_FANS] = {NULL}; 
 	
@@ -110,6 +112,8 @@ int main (int argc, char **argv)
 		} else if (strcmp(argv[i], "--color") == 0) {
 			header_start = HEADER_COLOR_START;
 			header_end = HEADER_COLOR_END;
+		} else if (strcmp(argv[i], "--no-reasons") == 0) {
+			no_reasons = 1;
 		} else {
 			printf(helpstring);
 			return 0;
@@ -163,6 +167,8 @@ int main (int argc, char **argv)
 	/* NVML init */
 #ifdef USE_NVML
     init_nvml();
+	for (int i = 0; i < gpu_count; i++)
+		get_nvml_handle(&gpus[i]);
 #endif
 
 	/* PCI init for VRAM/hotspot temps */
@@ -182,10 +188,10 @@ int main (int argc, char **argv)
 				for (int i = 0; i < gpu_count; i++){
 					if (i > 0)
 						printf("\n");
-					print_gpu_info(i, &gpus[i], compact);
+					print_gpu_info(i, &gpus[i], compact, no_reasons);
 				}		
 			} else if (gpu_num <= gpu_count - 1) {
-				print_gpu_info(gpu_num, &gpus[gpu_num], compact);
+				print_gpu_info(gpu_num, &gpus[gpu_num], compact, no_reasons);
 			}
 
 			if (!overwrite)
@@ -207,7 +213,7 @@ int main (int argc, char **argv)
 #endif
 }
 
-void print_gpu_info(int gpu_num, struct card_info *gpu, int compact) {
+void print_gpu_info(int gpu_num, struct card_info *gpu, int compact, int no_reasons) {
 	if (compact) {
 		/* One line per GPU */
 		printf("%s#%d FAN%s", header_start, gpu_num, header_end);
@@ -239,8 +245,10 @@ void print_gpu_info(int gpu_num, struct card_info *gpu, int compact) {
 #ifdef USE_NVML
 		printf("%s MEM %s", header_start, header_end);
 		printf("%3d%%", get_nvml_mem_util(gpu));
-		printf("%s CLK %s", header_start, header_end);
+		if (!no_reasons) {
-		print_nvml_clock_reason(1, gpu);
+			printf("%s CLK %s", header_start, header_end);
+			print_nvml_clock_reason(1, gpu);
+		}
 #endif
 
 
@@ -270,8 +278,10 @@ void print_gpu_info(int gpu_num, struct card_info *gpu, int compact) {
 
 #ifdef USE_NVML
 		printf("Mem util: %d%%\n", get_nvml_mem_util(gpu));
-		printf("Clock reasons: ");
+		if (!no_reasons) {
-		print_nvml_clock_reason(0, gpu);
+			printf("Clock reasons: ");
+			print_nvml_clock_reason(0, gpu);
+		}
 		printf("\n");
 #endif
 	}

gddr6.c

@@ -36,70 +36,69 @@ void init_gddr6(struct card_info *card)
 	card->bar0 = (pci_dev->base_addr[0] & 0xFFFFFFFF);
 
 	pci_cleanup(pacc);
-}
 	
-float get_vram_temp(struct card_info *card)
+	/* Open our memory mappings */
-{
+	card->vram_addr = NULL;
+	card->hotspot_addr = NULL;
+	
 	int fd;
-	float temp = 0.0;
-	
 	if ((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
     {
-        printf("Can't read memory. If you are root, enable kernel parameter iomem=relaxed\n");
+        printf("Can't read memory for VRAM and Hotspot temperatures. If you are root, enable kernel parameter iomem=relaxed\n");
-		return 0;
+		return;
     }
 	
+	unsigned int phys_addr, base_offset;
+	void *map_base;
+	
 	for (int i = 0; i < sizeof(device_offset_info) / sizeof(struct device_offset); i++) {
 		if (card->pci_device_id == device_offset_info[i].device_id){
-			unsigned int phys_addr = (card->bar0 + device_offset_info[i].vram_offset);
+			/* Map for VRAM */
-			unsigned int base_offset = phys_addr & ~(PG_SZ-1);
+			phys_addr = (card->bar0 + device_offset_info[i].vram_offset);
-			void *map_base = mmap(0, PG_SZ, PROT_READ, MAP_SHARED, fd, base_offset);
+			base_offset = phys_addr & ~(PG_SZ-1);
+			map_base = mmap(0, PG_SZ, PROT_READ, MAP_SHARED, fd, base_offset);
 			if(map_base == (void *) -1)
-			{
+				printf("Can't map memory for VRAM temperature. If you are root, enable kernel parameter iomem=relaxed\n");
-				if (fd != -1)
+			else
-					close(fd);
+				card->vram_addr = (void *) map_base + (phys_addr - base_offset);
-				printf("Can't read memory for VRAM temperature. If you are root, enable kernel parameter iomem=relaxed\n");
+			
-			}
+			
-			void *virt_addr = (char *) map_base + (phys_addr - base_offset);
+			/* Map for hotspot */
-			int read_result = *((unsigned int *) virt_addr);
+			phys_addr = (card->bar0 + device_offset_info[i].hotspot_offset);
-			temp = ((read_result & 0x00000fff) / 0x20);
+			base_offset = phys_addr & ~(PG_SZ-1);
-			munmap(map_base, PG_SZ);
+			map_base = mmap(0, PG_SZ, PROT_READ, MAP_SHARED, fd, base_offset);
+			if(map_base == (void *) -1)
+				printf("Can't map memory for Hotspot temperature. If you are root, enable kernel parameter iomem=relaxed\n");
+			else
+				card->hotspot_addr = (void *) map_base + (phys_addr - base_offset);
 		}
 	}
 	
 	close(fd);
+}
+
+float get_vram_temp(struct card_info *card)
+{
+	float temp = 0.0;
+	
+	if(card->vram_addr == NULL)
+		return 0.0;
+
+	int read_result = *((unsigned int *) card->vram_addr);
+	temp = ((read_result & 0x00000fff) / 0x20);
+
 	return temp;
 }
 
 float get_hotspot_temp(struct card_info *card)
 {
-	int fd;
 	float temp = 0.0;
 	
-	if ((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
+	if(card->hotspot_addr == NULL)
-    {
+		return 0.0;
-        printf("Can't read memory. If you are root, enable kernel parameter iomem=relaxed\n");
-		return 0;
-    }
 
-	for (int i = 0; i < sizeof(device_offset_info) / sizeof(struct device_offset); i++) {
+	int read_result = *((unsigned int *) card->hotspot_addr);
-		if (card->pci_device_id == device_offset_info[i].device_id){
+	temp = (read_result >> 8) & 0xff;
-			unsigned int phys_addr = (card->bar0 + device_offset_info[i].hotspot_offset);
-			unsigned int base_offset = phys_addr & ~(PG_SZ-1);
-			void *map_base = mmap(0, PG_SZ, PROT_READ, MAP_SHARED, fd, base_offset);
-			if(map_base == (void *) -1)
-			{
-				if (fd != -1)
-					close(fd);
-				printf("Can't read memory for hotspot. If you are root, enable kernel parameter iomem=relaxed\n");
-			}
-			void *virt_addr = (char *) map_base + (phys_addr - base_offset);
-			int read_result = *((unsigned int *) virt_addr);
-			temp = (read_result >> 8) & 0xff;
-			munmap(map_base, PG_SZ);
-		}
-	}
 
-	close(fd);
 	return temp;
 }

icx3.c

@@ -237,6 +237,6 @@ void set_fan(int fan, char *setting, struct card_info *card)
 	if (fan_readback.fanmode    != fan_control.fanmode ||
 		fan_readback.rpm_offset != fan_control.rpm_offset ||
 		fan_readback.duty       != fan_control.duty)
-		printf("Error setting fan %d on %s\n", fan, card->i2c_fd);
+		printf("Error setting fan %d on %s\n", fan, card->i2c_dev_path);
 }
 

nvidia-sensors.c

@@ -10,15 +10,14 @@ void init_nvml()
 		printf("Could not init NVML: %s\n", nvmlErrorString(result));
 }
 
-int get_nvml_handle(nvmlDevice_t *device, struct card_info *card)
+void get_nvml_handle(struct card_info *card)
 {
 	nvmlReturn_t result;
-	result = nvmlDeviceGetHandleByPciBusId_v2(card->pci_id, device);
+	result = nvmlDeviceGetHandleByPciBusId_v2(card->pci_id, card->nvml_device);
 	if (result != NVML_SUCCESS) {
-		printf("Failed to get device handle for card at %s: %s\n", card->pci_id, nvmlErrorString(result));
+		printf("Failed to get NVML device handle for card at %s: %s\n", card->pci_id, nvmlErrorString(result));
-		return 0;
+		card->nvml_device = NULL;
 	}
-	return 1;
 }
 
 void print_nvml_clock_reason(int compact, struct card_info *card)
@@ -52,12 +51,11 @@ void print_nvml_clock_reason(int compact, struct card_info *card)
 
 unsigned int get_nvml_temp(struct card_info *card)
 {
-	nvmlDevice_t nvml_device;
+	if (card->nvml_device == NULL)
-	if (!get_nvml_handle(&nvml_device, card))
 		return 0;
 	
 	unsigned int temp;
-	nvmlReturn_t result = nvmlDeviceGetTemperature(nvml_device, NVML_TEMPERATURE_GPU, &temp); 
+	nvmlReturn_t result = nvmlDeviceGetTemperature(*(nvmlDevice_t*)(card->nvml_device), NVML_TEMPERATURE_GPU, &temp); 
 	if (result != NVML_SUCCESS) {
 		printf("Failed to get temperature for card at %s: %s\n", card->pci_id, nvmlErrorString(result));
 		return 0;
@@ -67,12 +65,11 @@ unsigned int get_nvml_temp(struct card_info *card)
 
 unsigned long long get_nvml_clock_reasons(struct card_info *card)
 {
-	nvmlDevice_t nvml_device;
+	if (card->nvml_device == NULL)
-	if (!get_nvml_handle(&nvml_device, card))
 		return 0;
 	
 	unsigned long long reasons;
-	nvmlReturn_t result = nvmlDeviceGetCurrentClocksEventReasons(nvml_device, &reasons) ; 
+	nvmlReturn_t result = nvmlDeviceGetCurrentClocksEventReasons(*(nvmlDevice_t*)(card->nvml_device), &reasons) ; 
 	if (result != NVML_SUCCESS) {
 		printf("Failed to get clock reasons for card at %s: %s\n", card->pci_id, nvmlErrorString(result));
 		return 0;
@@ -83,12 +80,11 @@ unsigned long long get_nvml_clock_reasons(struct card_info *card)
 
 unsigned int get_nvml_mem_util(struct card_info *card)
 {
-	nvmlDevice_t nvml_device;
+	if (card->nvml_device == NULL)
-	if (!get_nvml_handle(&nvml_device, card))
 		return 0;
 	
 	nvmlUtilization_t util;
-	nvmlReturn_t result = nvmlDeviceGetUtilizationRates(nvml_device, &util);
+	nvmlReturn_t result = nvmlDeviceGetUtilizationRates(*(nvmlDevice_t*)(card->nvml_device), &util);
 	if (result != NVML_SUCCESS) {
 		printf("Failed to get clock reasons for card at %s: %s\n", card->pci_id, nvmlErrorString(result));
 		return 0;

nvidia-sensors.h

@@ -22,7 +22,7 @@ static struct clock_reason clock_reason_names[] =
 };
 
 void init_nvml();
-int get_nvml_handle(nvmlDevice_t *device, struct card_info *card);
+void get_nvml_handle(struct card_info *card);
 void print_nvml_clock_reason(int compact, struct card_info *card);
 unsigned int get_nvml_temp(struct card_info *card);
 unsigned long long get_nvml_clock_reasons(struct card_info *card);